Transfer of Data from "Solution" to "Results"
 

I am running the standard FLUENT package with: geometry -> mesh -> setup -> solution -> results. However, when I am in "solution" I can view all the contour plots that I need, TotalP, Vorticity, Turbulent Energy, but when I move on to "Results" I am limited in what I can choose from. Its like CFD-Post isnt picking up all of the data generated by the fluent solution block. Any help?

P.S. I know if I manually export the data from the "solution" block and manually load it in "results" then I do indeed get all the values I want to plot.

Make sure to select all quantities you want to write in the 'Data file Quantities' option from the Run calculation panel.

Thanks you are awesome! I am running a parametric optimization simulation so I wanted to change the output the one time, and have it automatically output exactly what I wanted for all of my design points without doing it manually. Thanks again!

Edit: Is there a way to save the settings in CFD-Post, such as zoom level and contour ranges, so that they will be the same for every design point?

Is there a way to save the settings in CFD-Post, such as zoom level and contour ranges, so that they will be the same for every design point?

I am not sure. But I can check and let you know

I appreciate it. If I create new figures and display those, it will save the contour value ranges and the titles, but the zoom level always defaults back to "fit to screen." I need the zoom levels to stay exactly as I set for the first design point, for every design point, because I will be making an animation of all the design points.

Did you try this?
http://www.cfd-online.com/Forums/ans...tion-zoom.html

Yes. The figure windows always default back to "zoom to fit" levels on each successive design point.

Edit:

Last December the guy in that thread posted this code to help people control the views and zoom of their CFD-Post views and images:
VIEW:View 2
Angular Coord Shift = 0.0
Auto Center = false
Axis Visibility = true
Border Visibility = false
Camera Mode = User Specified
Clip Scene = false
Coord Transform = Cartesian
Hide Difference Case = false
Highlight Type = Surface Mesh
Is A Figure = false
Projection = Orthographic
Ruler Visibility = true
Standard View = Isometric Y
CAMERA:
Option = Pivot Point and Quaternion
Pan = 0,0
Pivot Point = 0.8,0,0
Rotation = 0, 0, 0
Rotation Quaternion = 0,0,0,0
Scale = 0.8
Send To Viewer = True
END
END.


Is there a way to make this code run every time the CFD-Post is updated? I am running multiple design points and would like the camera views to be exactly the same every time. This code is a start, but I have to manually execute it inside the CFD-Post window for every design point.

Edit2: I have been experimenting with running CFDPost in -line mode, but it is difficult to get it to load my results and then display the proper views without the user interface.

I couldn't find any way to do this. I hope someone else is able to help you