CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Turbulence model issues

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 15, 2014, 05:34
Default Turbulence model issues
  #1
New Member
 
Carlos
Join Date: Dec 2011
Posts: 13
Rep Power: 14
chmurillor is on a distinguished road
Hi everybody!

I am trying to model a pressurized gas injection in a chamber at low pressure. This injection constitutes a supersonic flow near the inlet.
The boundary condition that I am considering is a pressure-inlet adjusted with a pressure profile defined with a UDF.

I have noticed that the convergence with a RANS or DES model does not harness levels low enough (especially, the turbulence parameters). However, the LES turbulence achieves lower levels with the same solver parameters and boundary conditions.

I would like to ask you for an insight to analyze this behavior because I am not sure of how the space filetring performed by the LES model affects the convergence levels.

Thanks in advance for your help,
chmurillor is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence Model - Linking Issues? AA29 OpenFOAM Programming & Development 3 June 20, 2014 16:21
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 18:44
turbulence model for Refrigerator cicatrix Main CFD Forum 0 October 3, 2012 02:47
Low Reynolds k-epsilon model YJZ ANSYS 1 August 20, 2010 14:57
2 stage axial turbine model convergence issues sherifkadry CFX 2 September 7, 2009 21:51


All times are GMT -4. The time now is 01:22.