# pressure Vs simulation time

 Register Blogs Members List Search Today's Posts Mark Forums Read

July 19, 2014, 07:09
pressure Vs simulation time
#1
Member

Join Date: Feb 2012
Posts: 97
Rep Power: 8
I have simulated a transient problem by fluent , I need to plot pressure vs simulated time by fluent , how can do that ??

this pic experimental results that i want plot my simulated result like it

Attached Images
 Untitled.jpg (59.7 KB, 20 views)

July 19, 2014, 07:53
#2
Senior Member

Ehsan Asgari
Join Date: Apr 2010
Posts: 315
Rep Power: 10
Quote:
 Originally Posted by malay I have simulated a transient problem by fluent , I need to plot pressure vs simulated time by fluent , how can do that ?? this pic experimental results that i want plot my simulated result like it
Hi,
It is possible. You can find it under Solve->Monitors->Surface...
There you can define and monitor a quantity of solution at each time step or iteration.
Goodluck

July 19, 2014, 08:17
#3
Member

Join Date: Feb 2012
Posts: 97
Rep Power: 8
Quote:
 Originally Posted by syavash Hi, It is possible. You can find it under Solve->Monitors->Surface... There you can define and monitor a quantity of solution at each time step or iteration. Goodluck

July 19, 2014, 08:25
#4
Senior Member

Ehsan Asgari
Join Date: Apr 2010
Posts: 315
Rep Power: 10
Quote:
 Originally Posted by malay Hi , thanks for reply Your advice just if i don't have solution , I mean how can i do that if i already made the simulation
All right, If you have saved multiple data during your transient simulation, you could extract the pressure at a particular surface and put it all together and then plot! You might do it via a post-processing tool like CFD-POST.
Goodluck

July 19, 2014, 08:29
#5
Member

Join Date: Feb 2012
Posts: 97
Rep Power: 8
Quote:
 Originally Posted by syavash All right, If you have saved multiple data during your transient simulation, you could extract the pressure at a particular surface and put it all together and then plot! You might do it via a post-processing tool like CFD-POST. Goodluck
thank you so much , i am grateful if you drop some explanation lines for this method ...

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post auf dem feld FLUENT 17 February 26, 2016 14:04 danny123 OpenFOAM Programming & Development 8 September 6, 2013 02:34 fferroni OpenFOAM Post-Processing 7 June 8, 2012 07:56 bookie56 OpenFOAM Installation 8 August 13, 2011 04:03 jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24

All times are GMT -4. The time now is 06:15.