| metmet |
August 7, 2014 02:01 |
Partition: cell count = 0
Hi Friends;
I have created a simple 2D mesh By ICEM for a vertical rectangular duct. Meshes have been converted to unstructured mesh and all edges, vertexes and faces have been associated to the points, curves and surfaces and finally when I saved it in output I saw the "done" message in log panel.
now I want to read msh file in fluent but I have several errors!!
this is first error when I tried to read mesh inside workbench.
PHP Code:
Building...
mesh
Error at host:
Partition: cell count = 0; count must be greater than zero.
Error at Node 3:
Partition: cell count = 0; count must be greater than zero.
Error at Node 5:
Partition: cell count = 0; count must be greater than zero.
Error at Node 0:
Partition: cell count = 0; count must be greater than zero.
Error at Node 4:
Partition: cell count = 0; count must be greater than zero.
Error at Node 7:
Partition: cell count = 0; count must be greater than zero.
Error at Node 6:
Partition: cell count = 0; count must be greater than zero.
Error at Node 2:
Partition: cell count = 0; count must be greater than zero.
Error at Node 1:
Partition: cell count = 0; count must be greater than zero.
Error:
Partition: cell count = 0; count must be greater than zero.
Error Object: #f
Real overflow
Real underflow
Real overflow
Real underflow
Real overflow
Real underflow
And the following error occurs when I read mesh by fluent from start menu (without workbench)
PHP Code:
Error: Build Grid: Aborted due to critical error.
Error Object: #f"
Because of simplicity of geometry I deleted it and recreated it again (in 10 min) but same errors occurred. I changed the path of msh file in different folders and renamed it but not succeed. last time I faced this error I changed the path of file and it worked but now I wana solve it. would you please check it and guide me what should I do?
https://drive.google.com/folderview?...0E&usp=sharing
I'm very grateful for your help! |
