multiphase flow vof model with mass transfer

frikz · September 5, 2014, 13:18

hi

I am trying to simulate the mass transfer between a liquid desiccant flowing downwards and humid air flow upwards next to the liquid. Does anyone have any idea of the main models that i need to use and if i need any UDS or UDF.

Also the material properties of the moist air will be a mixture of water vapour and air, but for the aqueous liquid, i need to define a mass concentration eg 30% mass conc. Does anyone know how i would go about doing that as there is no option to change or even define the concentration of the liquid/ solution.

Any help will be great

thanks

vonboett · October 27, 2014, 05:12

Hi, if it is about two mixing phases and one phase kept separate, use the interMixingFOAM solver but adjust the alphaEqns.H to keep concnetrations bound and mass conserved. However, note that with high diffusion constants you may still loose mass with that approach.

September 5, 2014, 13:18	multiphase flow vof model with mass transfer	#1
frikz New Member Join Date: Sep 2014 Posts: 1 Rep Power: 0	hi I am trying to simulate the mass transfer between a liquid desiccant flowing downwards and humid air flow upwards next to the liquid. Does anyone have any idea of the main models that i need to use and if i need any UDS or UDF. Also the material properties of the moist air will be a mixture of water vapour and air, but for the aqueous liquid, i need to define a mass concentration eg 30% mass conc. Does anyone know how i would go about doing that as there is no option to change or even define the concentration of the liquid/ solution. Any help will be great thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Mass imbalance problem in multiphase water and steam CFX case	Antech	CFX	1	October 26, 2020 04:03
Overflow Error in Multiphase Modelling with Two Continuous Fluids	ashtonJ	CFX	6	August 11, 2014 14:32
Coupled VOF and Multiphase Segregated Flow for a gas bubble problem??	EnronZhang	STAR-CCM+	1	December 19, 2013 08:41
Multiphase Mass transfer UDF issue	therandomestname	FLUENT	0	April 21, 2011 14:51
Multiphase Multicomponent mass transfer -Initial condition	pannsave	CFX	10	February 9, 2011 01:12

October 27, 2014, 05:12		#2
vonboett Senior Member Albrecht vBoetticher Join Date: Aug 2010 Location: Zürich, Swizerland Posts: 239 Rep Power: 17	Hi, if it is about two mixing phases and one phase kept separate, use the interMixingFOAM solver but adjust the alphaEqns.H to keep concnetrations bound and mass conserved. However, note that with high diffusion constants you may still loose mass with that approach.