CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Create a curved surface/ plane in fluent ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By gfoam

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 13, 2014, 11:01
Lightbulb Create a curved surface/ plane in fluent ?
  #1
New Member
 
Tarkes Dora
Join Date: Jun 2014
Location: Chennai
Posts: 11
Rep Power: 12
tarkesdora is on a distinguished road
Send a message via Skype™ to tarkesdora
Hey there,
can anyone help me in the procedure to create a curved surface or plane ?
Generally by specify cordinated or point and normal a flat rectangular plane can be created. But how to create a curved plane the purpose is to evaluate surface integral of velocity in fluent.
tarkesdora is offline   Reply With Quote

Old   September 15, 2014, 15:04
Default
  #2
Senior Member
 
Gonzalo
Join Date: Mar 2011
Location: Argentina
Posts: 122
Rep Power: 16
gfoam is on a distinguished road
Hi, can't you create this geometry in the geometry creation of your model and then mesh it and set the BC's for these surface as interior? Then you can compute all the integrals you want. Another approach, is inside FLUENT on the menu Surface==> Quadric... you can create a plane surface, a sphere and another kind with polynomials. I hope this helps you. Regards
Gonzalo
pasha72 likes this.
gfoam is offline   Reply With Quote

Reply

Tags
fluent 14.0, plane, surface integral

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
looking for a smart interface matlab fluent chary FLUENT 24 June 18, 2021 10:07
[snappyHexMesh] How to create internal boundaries using snappyHexMesh robyTKD OpenFOAM Meshing & Mesh Conversion 2 October 19, 2014 10:57
how to simulate drop impact on a solide surface using fluent wbka FLUENT 0 February 14, 2013 16:50
Where's the singularity/mesh flaw? audrich FLUENT 3 August 4, 2009 02:07
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 18:08.