CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Eulerian Wall Film Model with radiation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 30, 2014, 08:02
Default Eulerian Wall Film Model with radiation
  #1
New Member
 
Sercan
Join Date: Oct 2014
Posts: 1
Rep Power: 0
wetru is on a distinguished road
Hello

I am trying to simulate the condensation on a headlamp. condensation occurs on inner surface of the lens. I try to use Eulerian Wall Film Model. this model is working good without bulbs ON. But when I gave energy to the bulb which means high radiation, results become unreal. since outer air temp is 23°C, and the bulb gives radiation energy to the lens, I had app. (minus) -250 °C on lens surface which is not realistic. By the way I am using DO radiation model.

In help menu there is an explanation as below.

***************
28.1. Limitations
The following limitations exist for the Eulerian Wall Film model:
  • Available for 3-D geometries only
  • Compatible with stationary walls only
Many models (e.g., VOF multiphase flow or radiation) will not interact correctly with the film model without first modifying the boundary conditions using UDFs.

*******************
I wanted help from ANSYS support, but do not receive any feedback yet.

So I would like to ask you if anybody knows such kind of problem, and which kind of UDF needed for solution?
wetru is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bai-Gosman droplet impaction model in StarCCM+ crevoise STAR-CCM+ 2 April 25, 2019 09:02
Using radiation model for simulation of flat plate solar collector marjanbn FLUENT 1 February 24, 2017 18:22
Overflow Error in Multiphase Modelling with Two Continuous Fluids ashtonJ CFX 6 August 11, 2014 15:32
GETVAR Error in Multiband Monte Carlo Radiation Simulation with Directional Source silvan CFX 3 June 16, 2014 10:49
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug unoder OpenFOAM Installation 11 January 30, 2008 21:30


All times are GMT -4. The time now is 05:37.