CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

2-phase flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 14, 2015, 04:03
Default 2-phase flow
  #1
New Member
 
sagar
Join Date: Nov 2014
Posts: 3
Rep Power: 4
sagar457 is on a distinguished road
I have been trying to simulate phase change process of water in flow through tube with constant heat flux on tube wall but getting divergence after 10-15 iterations...tried decreasing under relaxation factors & courant number but problem still persists.Tried changing mesh as well but it's of no use.

Model-Eularian RPI Boiling model.
for turbulence-K-epsilon RNG.

Is there anything else that I need to check??
any help on this will be appriciated
sagar457 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas-liquid 2 phase flow in microchannels using VoF LyngHoo FLUENT 1 November 13, 2012 20:01
Two Phase Darcy flow with gravity -> problem Cyp OpenFOAM Programming & Development 0 November 17, 2010 08:58
two phase flow + ice phase and breaking soeren87 OpenFOAM Running, Solving & CFD 0 September 19, 2010 10:20
Validation for laminar Disperse phase flow shashwat Main CFD Forum 0 April 4, 2008 02:20
how 2 freeze 1 phase flow field & start lagrangian KK CFX 5 February 14, 2008 17:48


All times are GMT -4. The time now is 02:11.