how to change the material of boundary condition?

Emad Ali · February 13, 2015, 13:04

Hello everyone

I'm working with 2D model, I want to change the material of wall boundary conditions but I cannot change the default ( Aluminum )

As you can see in the picture (attachment) I go to Edit>Edit material>Change

but when I click the 'Change' it does not show me the list of materials !!!

Please anyone can help me

Farid · February 13, 2015, 13:30

Click on material and post a photo of your screen. Upon the tree of materials, there should be more than one material under Solid. Then you will be allowed to change the boundary material.
Also, you can assign the physical properties of your boundary material to Aluminium. Then you don't need to touch anything.

Emad Ali · February 15, 2015, 05:25

Quote:

Originally Posted by Farid

Click on material and post a photo of your screen. Upon the tree of materials, there should be more than one material under Solid. Then you will be allowed to change the boundary material.
Also, you can assign the physical properties of your boundary material to Aluminium. Then you don't need to touch anything.

Thank you so much....
I did what you said and it works

, really appreciate your help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Setting rotating frame of referece.	RPFigueiredo	CFX	3	October 28, 2014 04:59
Accessing multiple boundary patches from a custom boundary condition file	ripudaman	OpenFOAM Programming & Development	0	October 22, 2014 18:34
To change temperature in mass flow inlet boundary condition per iteration	ajinkya201991	FLUENT	1	July 11, 2014 11:29
inlet velocity boundary condition	murali	CFX	5	August 3, 2012 08:56
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 04:05

February 13, 2015, 13:30		#2
Farid New Member Join Date: Apr 2014 Posts: 13 Rep Power: 12	Click on material and post a photo of your screen. Upon the tree of materials, there should be more than one material under Solid. Then you will be allowed to change the boundary material. Also, you can assign the physical properties of your boundary material to Aluminium. Then you don't need to touch anything.