Fluent - configure inlet values...

DannyZ · June 12, 2015, 04:42

I am Analyzing Workplace Distribution Of Harmful Gases Exposed During Welding (Gas Tungsten Arc Welding).. During welding, CO2,CO and O3 gases being formed. I know their ppm (also mg/m3) values but nothing more, can I use this values for inlet or can I convert ppm anything useful? or does anyone know there is a lecture for GTAW combustion gases flow rates?

engineer master · March 26, 2017, 03:07

Dear Danny
I have same problem. please if you solve this problem can be send solving as email: emad.ab74@gmail.com
Many thanks

June 12, 2015, 04:42	Fluent - configure inlet values...	#1
DannyZ New Member Deniz YILMAZ Join Date: Jun 2015 Posts: 1 Rep Power: 0	I am Analyzing Workplace Distribution Of Harmful Gases Exposed During Welding (Gas Tungsten Arc Welding).. During welding, CO2,CO and O3 gases being formed. I know their ppm (also mg/m3) values but nothing more, can I use this values for inlet or can I convert ppm anything useful? or does anyone know there is a lecture for GTAW combustion gases flow rates? engineer master likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2D Hypersonic Inlet in FLUENT - Convergence Issues	Fraisdegout	FLUENT	6	December 15, 2016 02:07
Slow overwriting of parameter values when Fluent is opened	zubs	FLUENT	0	April 10, 2015 05:18
Fluent 2D Reference Values	Adam	FLUENT	1	January 16, 2009 02:58
Why's FLUENT changing the reference values?	siw	FLUENT	0	November 6, 2008 13:17
what the result is negatif pressure at inlet	chong chee nan	FLUENT	0	December 29, 2001 05:13

March 26, 2017, 03:07		#2
engineer master New Member ahmed master Join Date: Feb 2017 Posts: 4 Rep Power: 9	Dear Danny I have same problem. please if you solve this problem can be send solving as email: emad.ab74@gmail.com Many thanks