import to Ansys Fluent Design modeler shows 4141 parts and bodies

samnath · April 5, 2015, 11:34

[IMG]file:///C:/Users/balakumaran/Pictures/Error.jpg[/IMG]

Here I have attached my error file......actually im looking to solve vertical axis wind turbine....i have designed it in catia and assembled in the same. When tried to import it in Ansys Fluent Design modeler It showed me 4141 parts, 4141 bodies.....In that 4141 bodies i had mix up of surface bodies and solid too......pls solve this problem....

Also I want to clear myself as why we need to have single part and single body while solving fluent.......

Thanks in advance

regards

sam

Audrius · April 5, 2015, 11:46

Upload new picture.

samnath · April 5, 2015, 13:53

Actually I tried to upload it, but If i tried to insert picture it asks me to paste image link......how to do that one......I don't know

samnath · April 5, 2015, 13:56

Now I attached file.....you can look over it...thank you

Audrius · April 5, 2015, 14:50

Click on Create --> Boolean, then connect all parts into the one part. Your model is challenging due to a lot of parts, I think You will have a lot of problems with meshing.

samnath · April 6, 2015, 02:22

okay tell me why we need to have one part and one body in solving Ansys fluent......why it is mandatory to have this?

April 5, 2015, 11:34	import to Ansys Fluent Design modeler shows 4141 parts and bodies	#1
samnath New Member Kishore Join Date: Apr 2015 Posts: 5 Rep Power: 11	[IMG]file:///C:/Users/balakumaran/Pictures/Error.jpg[/IMG] Here I have attached my error file......actually im looking to solve vertical axis wind turbine....i have designed it in catia and assembled in the same. When tried to import it in Ansys Fluent Design modeler It showed me 4141 parts, 4141 bodies.....In that 4141 bodies i had mix up of surface bodies and solid too......pls solve this problem.... Also I want to clear myself as why we need to have single part and single body while solving fluent....... Thanks in advance regards sam

April 5, 2015, 13:53	Error reply	#3
samnath New Member Kishore Join Date: Apr 2015 Posts: 5 Rep Power: 11	Actually I tried to upload it, but If i tried to insert picture it asks me to paste image link......how to do that one......I don't know

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] Connecting 3D bodies in Ansys Design Modeler	chipper	ANSYS Meshing & Geometry	4	January 25, 2018 09:45
Cad Model - Design parameters - Parts and Regions	crevoise	STAR-CCM+	1	January 29, 2013 07:52

April 5, 2015, 11:46		#2
Audrius Member Audrius Join Date: Apr 2015 Location: Kaunas Posts: 30 Rep Power: 11	Upload new picture.

April 5, 2015, 14:50		#5
Audrius Member Audrius Join Date: Apr 2015 Location: Kaunas Posts: 30 Rep Power: 11	Click on Create --> Boolean, then connect all parts into the one part. Your model is challenging due to a lot of parts, I think You will have a lot of problems with meshing.

April 6, 2015, 02:22		#6
samnath New Member Kishore Join Date: Apr 2015 Posts: 5 Rep Power: 11	okay tell me why we need to have one part and one body in solving Ansys fluent......why it is mandatory to have this?