rotation axis origin and direction
HI, I got a problem on making rotating wheel.
I set rotation origin as (3, 2, 5) and the rotating axis Parallel to z axis. so, how can i set rotation direction?? It suppose to be (3, 2,7) ???? or just (0,0,1) need your help |
If rotation is around the z-axis, your axis should be (x y z) = (0, 0, 1).
|
thank you for answer.
rotation axis is not z-axis but the axis parrellel to z-axis then rotation direction should be (0,0,1)??? not (3,2,7)??? |
yes, because you already give the origin coordinates, so if you use origin (3,2,5) with axis (0,0,1) the axis will be parallel to z, but not on z.
If you would use (3,2,7) as axis direction, it would not be aligned with z at all, instead pointing away from it slightly in the positive x and y direction. |
then ,my problem solved now
thank you! best regards |
Glad to be of help!
|
All times are GMT -4. The time now is 04:02. |