|
[Sponsors] |
February 16, 2007, 02:33 |
Error: cx-add-item: wta[2](string)
|
#1 |
Guest
Posts: n/a
|
Hello, I am trying to model a laminar flow for a test plant consisting of CH4, CO, CO2, H2 and water vapor. Therefore I tried to include new material properties for the just mentioned gases. That results in the error "cx-set-list-items: wta[2](list of strings)". Does anybody have an idea how I could solve that problem? Thanx in advance! Claud
|
|
September 1, 2009, 12:09 |
Error: cx-add-item: wta[2](string)
|
#2 |
New Member
Rodrigo Bocaz
Join Date: Sep 2009
Location: Chile
Posts: 1
Rep Power: 0 |
Hi, can some one help me with this error, it appears when y launch fluent 6.3.26 on windows Vista X64.
The complete message is: Welcome to Fluent 6.3.26 Copyright 2006 Fluent Inc. All Rights Reserved Loading "C:\Fluent.Inc\fluent6.3.26\lib\fl_s1119-64.dmp" Done. Error: cx-add-item: wta[2](string) Error Object: 1204 Error: cx-add-item: wta[2](string) Error Object: 1204 Thanks, i will apreciate any help. |
|
October 28, 2009, 04:43 |
cortex problem (Error: cx-add-item: wta[2](string) )
|
#3 | |
New Member
Mohamed Hendawi
Join Date: Jun 2009
Posts: 1
Rep Power: 0 |
Quote:
I have the same problem : please cf. the attached screen-shot I checked that:
Any help please Thank you Edited: Finally, the problem was resolved by deleting .cxlayout and .flrecent found in %HOMDEDRIVE% (some where like a private local default user drive) Good luck Last edited by Hendawi; November 23, 2009 at 02:53. Reason: Problem was resolved |
||
June 17, 2015, 04:45 |
Problem not solved
|
#4 |
New Member
riccardo
Join Date: Jun 2015
Posts: 2
Rep Power: 0 |
Good morning guys. I have followed your indications but I have always the same problem. Every time that i read the case and data the same error appears. I have deleted the file that you have told but nothing change. How can i fix this? Thank you!
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Other] refineWallLayer Error | Yuby | OpenFOAM Meshing & Mesh Conversion | 2 | November 11, 2021 11:04 |
[ICEM] How can I define different zones in ICEM? | llrr | ANSYS Meshing & Geometry | 14 | February 12, 2017 13:44 |
[PyFoam] and paraview | eelcovv | OpenFOAM Community Contributions | 28 | May 30, 2016 09:23 |
How to add X and Y forces at a point | cgusty01 | SU2 | 4 | February 18, 2015 13:17 |
Can not add a new user defined visualization parameter in Cut plot! | george85 | FloEFD, FloWorks & FloTHERM | 5 | November 9, 2011 13:33 |