CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Help with Mesh of Axi-symmetric Geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 29, 2015, 16:41
Default Help with Mesh of Axi-symmetric Geometry
  #1
New Member
 
Yetly
Join Date: Mar 2015
Posts: 7
Rep Power: 9
yetlyg is on a distinguished road
Hello All,

My project involves the natural convection study of a long vertical tube.

My geometry is a 2D (30mm x 1m) rectangle. One side of the 1 m length will be the line of symmetry (axisymmetric) and the other 1m side will be the tube wall (3mm thickness). Please see attached snapshot.

My goal is to create a good quality mesh. I keep getting messages of poor quality.

I want to have a bias factor on all four sides of the rectangle. But because there is a wall thickness, I will need to put a bias factor in all sides of the wall thickness geometry as well. Please see attached snapshots.

This method is not working. I am trying to improve the aspect ratio by adding more elements or divisions on my edge sizing and changing the bias factors as well. I used bias factors ranging from 5-50.

Can anyone please give some advice? Is it just a matter of finding the right number of divisions on each edge in order to make this good quality?

Thank you and have a good day.

Yetly
Attached Images
File Type: jpg geometry.jpg (41.5 KB, 7 views)
File Type: jpg mesh.jpg (75.8 KB, 7 views)
File Type: jpg photo.jpg (42.2 KB, 5 views)
File Type: jpg error1.jpg (54.2 KB, 7 views)
File Type: jpg error3.jpg (45.4 KB, 6 views)
yetlyg is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to set periodic boundary conditions Ganesh FLUENT 15 November 18, 2020 06:09
[snappyHexMesh] problems generating clean mesh Christian_tt OpenFOAM Meshing & Mesh Conversion 2 June 20, 2019 05:39
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 06:20
[ANSYS Meshing] Meshing Strategy for inside geometry powpow ANSYS Meshing & Geometry 6 January 16, 2013 04:32
unstructured vs. structured grids Frank Muldoon Main CFD Forum 1 January 5, 1999 10:09


All times are GMT -4. The time now is 10:35.