|July 7, 2015, 09:28||
extending the outlet
Join Date: Jun 2015
Posts: 34Rep Power: 3
I wanted to ask one thing about extending the outlet for getting rid of reverse flow.
When I fill extend the outlet what boundary condition should I give to extended part outlet.
That is I should give it wall or simply leave it .
And one more thing when i adapt and patch .
During I adapt by geometry is not a sphere or cylinder.
Its kind of small cylinder kept on a cuboid and there is inlet from upper surface of cylinder and there are 6 outlets in bottom surface of cuboid.
My origin is at centre of bottom surface of cuboid . Now how should I adapt.
|Thread||Thread Starter||Forum||Replies||Last Post|
|species - pressure outlet||cfd user||FLUENT||7||March 14, 2012 00:36|
|Outlet BC for disturbed Poiseuille flow||murx||CFX||10||February 22, 2012 14:55|
|Pressure outlet boundary condition||fluent_newbie||FLUENT||0||December 2, 2011 00:51|
|How to define the turbulence intensity and mixing length at an outlet (for k-eps)?||david39||OpenFOAM Running, Solving & CFD||6||February 2, 2011 04:01|
|outlet boundary condition||neil||CFX||1||June 17, 2002 00:57|