CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

1way FSI simulation using ansys structural and Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   August 5, 2015, 10:49
Default 1way FSI simulation using ansys structural and Fluent
New Member
Join Date: Mar 2014
Posts: 16
Rep Power: 12
mmkkeshavarzi is on a distinguished road
Dear all, i am in the early stages of doing my thesis on FSI simulation of Agard wing. I encounter with a simulation problem during my 1-way simulation!

I used Fluent to simulate the flow process, exported the pressure data to static structural and i saw my wing deformation.

But the next step is to export structure deformation data to fluent to analyse the flow process. But i cannot figure it out how to export the static structural solution into Fluent,although the reverse procedure (Fluent to Static Structural) is more easy.

I will really appreciate it if you can help me.
Thanks in advance
mmkkeshavarzi is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
1 way and 2 way FSI in ANSYS Workbench with Fluent and ANSYS Structural jwillie2000 FLUENT 6 November 26, 2017 23:21
How to combine ANSYS Fluent and Structural analysis? diwakar ANSYS 2 June 18, 2015 12:07
Ansys structural and fluent for FSI assafwei FLUENT 1 June 20, 2014 10:56
1-way time step problem in doing FSI between Fluent and Transient Structural sihaqqi ANSYS 0 November 21, 2013 02:45
From Fluent 6.23 to ansys 12 structural Rich1979 FLUENT 0 April 18, 2011 09:40

All times are GMT -4. The time now is 06:43.