Error while saving the case and data file

January 25, 2007, 12:07

Hi,

I am running a case in which i enabled Autosave for every timestep. After few timesteps,it's giving the error " Error: write_thread_svar!" while writing the case and data file and terminating.

Can someone help me on this?the reason why i am seeing this error?

Thanks

nenazarian · July 23, 2012, 20:54

Hi
Do you remember how did u fixed this problem?

Bionico · July 24, 2012, 02:41

Hi nenazarian,
can you tell me what you wrote in the command line?
Usually I use a similar command:

root/folder/subfolder/example1/example1
(not example1.cas, I haven't tried yet but I think that it doesn't work with the format extension ...)

beer · January 8, 2013, 11:34

I'm sure you have already solved it, but just in case of...:
I just had the same problem a few minutes ago. In my case it was trivial, the hard disc had no free space.

Greetings

akshay23p · September 2, 2015, 06:24

Quote:

Originally Posted by Sri
;138559

Hi,

I am running a case in which i enabled Autosave for every timestep. After few timesteps,it's giving the error " Error: write_thread_svar!" while writing the case and data file and terminating.

Can someone help me on this?the reason why i am seeing this error?

Thanks

What is the solution to this problem?

pakk · September 2, 2015, 08:43

If the root problem is that your harddisk is full: delete files, or buy a bigger harddisk.

akshay23p · September 2, 2015, 09:55

Quote:

Originally Posted by pakk

If the root problem is that your harddisk is full: delete files, or buy a bigger harddisk.

My harddisk is 70 % free.

January 25, 2007, 12:07	Error while saving the case and data file	#1
Sri Guest Posts: n/a	Hi, I am running a case in which i enabled Autosave for every timestep. After few timesteps,it's giving the error " Error: write_thread_svar!" while writing the case and data file and terminating. Can someone help me on this?the reason why i am seeing this error? Thanks

January 8, 2013, 11:34		#4
beer Member Join Date: Dec 2012 Posts: 92 Rep Power: 13	I'm sure you have already solved it, but just in case of...: I just had the same problem a few minutes ago. In my case it was trivial, the hard disc had no free space. Greetings samity12 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Error in Saving either or both case and data files	Fascal	FLUENT	4	July 18, 2010 11:12
Changing the grid on the same set-up	Katya	FLUENT	7	October 8, 2009 16:31
Initial condition data file from coarse mesh case	Kushagra	FLUENT	1	July 25, 2008 21:53
Saving particle (DPM) data to file?	Philip	FLUENT	2	June 12, 2006 01:41
How to update polyPatchbs localPoints	liu	OpenFOAM Running, Solving & CFD	6	December 30, 2005 17:27

July 23, 2012, 20:54		#2
nenazarian Member Negin Nazarian Join Date: Jan 2012 Location: San Diego Posts: 61 Rep Power: 14	Hi Do you remember how did u fixed this problem?

July 24, 2012, 02:41		#3
Bionico Senior Member Flavio Join Date: Sep 2011 Location: Brescia, Italy Posts: 181 Rep Power: 15	Hi nenazarian, can you tell me what you wrote in the command line? Usually I use a similar command: root/folder/subfolder/example1/example1 (not *example1.cas*, I haven't tried yet but I think that it doesn't work with the format extension ...)

September 2, 2015, 08:43		#6
pakk Senior Member Join Date: Nov 2013 Posts: 1,965 Rep Power: 26	If the root problem is that your harddisk is full: delete files, or buy a bigger harddisk.