Laminar flow inside a filter holder problem with convergence -- CFD Online Discussion Forums

September 4, 2015, 10:53	Laminar flow inside a filter holder problem with convergence	#1
sachinip New Member Join Date: Oct 2014 Posts: 12 Rep Power: 11	Hello, I am simulating the flow inside a filter holder. I use mass flow as inlet, pressure outlet as outlet , porous jump for my filter and two symmetries because i simulate the one fourth of my holder. My flow is laminar (maximum reynolds around 320). However when i simulate it as laminar I have the warning reverse flow in ... When I simulate it as turbulence i have no error wanring and my simulation converge. Do you know why can it be? Thank you very much in advance.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFX Treatment of Laminar and Turbulent Flows	Jade M	CFX	18	September 15, 2022 07:08
Laminar Pipe Flow convergence issues	preichl	OpenFOAM Running, Solving & CFD	11	September 22, 2014 21:22
convergence problem in 3D steady state, laminar flow in a bath	vajiheh	FLUENT	0	July 10, 2009 12:18
Convergence problem in SUPERSONIC FLOW	sridhar	FLUENT	0	July 7, 2007 11:16
Problem with Convergence at high flow rates	Syed	Siemens	1	April 10, 2007 15:18

All times are GMT -4. The time now is 16:30.