head loss determination

suyash1234 · September 13, 2015, 10:04

hey guys,

this is my first thread and i just started working on ansys fluent couple months ago and i have encountered a problem. i have made a geometry,meshed it and run a solution. what i want is the head loss through the pipe which would require the friction factor as hf(head loss) = flv2/2gd .

how do i obtain the value of the head loss through my pipe so that i can further use it to find a good pump for it.

thanks in advance

AHF · September 13, 2015, 13:44

Quote:

Originally Posted by suyash1234

hey guys,

this is my first thread and i just started working on ansys fluent couple months ago and i have encountered a problem. i have made a geometry,meshed it and run a solution. what i want is the head loss through the pipe which would require the friction factor as hf(head loss) = flv2/2gd .

how do i obtain the value of the head loss through my pipe so that i can further use it to find a good pump for it.

thanks in advance

i think fluent is not suitable for your work ( finding head loss and after that choose pump ) there are a lot software for pipes like pipeflow

by the way for head loss i think you can use wall shear stress and use it to calculate Cf ( Friction Coefficient )

September 13, 2015, 10:04	head loss determination	#1
suyash1234 New Member Join Date: Sep 2015 Posts: 1 Rep Power: 0	hey guys, this is my first thread and i just started working on ansys fluent couple months ago and i have encountered a problem. i have made a geometry,meshed it and run a solution. what i want is the head loss through the pipe which would require the friction factor as hf(head loss) = flv2/2gd . how do i obtain the value of the head loss through my pipe so that i can further use it to find a good pump for it. thanks in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD by anderson, chp 10.... supersonic flow over flat plate	varunjain89	Main CFD Forum	18	May 11, 2018 07:31
Head Loss	holsten	Main CFD Forum	0	June 16, 2014 15:45
simpleFoam head loss in a pipe	lean_p	OpenFOAM Running, Solving & CFD	0	October 15, 2013 16:16
How to deifmne head loss co effcint ?	Angelina	FLUENT	1	February 8, 2006 09:41
How to deifmne head loss co effcint in cfx?	Angelina	CFX	4	February 7, 2006 13:14