|
[Sponsors] |
CFD-Post displays long lines instead of model |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 6, 2015, 13:01 |
CFD-Post displays long lines instead of model
|
#1 |
Senior Member
Jordi Pina
Join Date: Mar 2015
Posts: 157
Rep Power: 11 |
Hello,
I'm simulating a fluid in a very little zone of (1e-6x4e-7)m and it turns out that, even though the calculation works good and the exported ASCII files look all right, in CFD-Post what I see is the following: Someone has some clue? It looks like CFD-Post displayed my model "extruded". The original model was created using CATIA V5, exported as a .stl file and once in FLUENT, 0.001 scale used. Thanks a lot! |
|
October 9, 2015, 13:24 |
|
#2 |
Senior Member
Jordi Pina
Join Date: Mar 2015
Posts: 157
Rep Power: 11 |
Nobody has faced this problem before?
|
|
October 10, 2015, 07:10 |
|
#3 |
Senior Member
Jordi Pina
Join Date: Mar 2015
Posts: 157
Rep Power: 11 |
Hello everybody,
might not be a "solution" but yes a turnaround: exporting as .cgns files and using Paraview free software for postprocessing solves the problm. I guess it's a bug of CFD-Post related to small models. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 06:36 |
CFD Post Streamlines better representation? | Dr. Flow Squad | CFX | 2 | January 20, 2014 14:48 |
urgent... multiphase cfd model of packed bed reactor.( VOF MODEL using) | balu@gold6 | FLUENT | 4 | July 26, 2012 11:37 |
Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 26, 2009 00:27 |
What do you CFD guys do during a long simulation running? | bearcat | Main CFD Forum | 5 | July 23, 2009 09:08 |