Loading Fuel Cell in ANSYS Fluent
2 Attachment(s)
Hi All,
I am looking to incorporate Fuel Cell in Ansys Fluent but is unable to do so. I am attaching the required file which I need to do in Fluent but till now has failed in the effort. Thanks in advance. |
design of fuel cell
2 Attachment(s)
hi, i want to use a fuel cell example of simpower and change the outputs (+) and (-) into an input ( current) and an output (voltage) as i did to the batterie model. would you please help me
this is the fuel cell and this is how i made the batterie |
@ rsdsaurav : What is the error exactly? Please paste the error text.
|
I want to use"controlled current source" or "controlled voltage source" like i did to the battery example in order to impose a current as an input and a voltage as an output pf the PAC .This will convert the outputs + et - of the PAC
|
Error for Fuel Cell loading in Ansys Fluent
Quote:
Actually I am unable to load the module, as the Fuel Cell module is not showing in Fluent..Can u clarify? Thanks in advance.. |
Quote:
https://www.youtube.com/watch?v=H3p7Vp99AwA |
the program is using matlab simulink
|
All times are GMT -4. The time now is 15:18. |