Loading Fuel Cell in ANSYS Fluent

rsdsaurav · October 9, 2015, 09:46

Hi All,
I am looking to incorporate Fuel Cell in Ansys Fluent but is unable to do so. I am attaching the required file which I need to do in Fluent but till now has failed in the effort. Thanks in advance.

imen_ben · October 10, 2015, 11:23

hi, i want to use a fuel cell example of simpower and change the outputs (+) and (-) into an input ( current) and an output (voltage) as i did to the batterie model. would you please help me
this is the fuel cell

and this is how i made the batterie

maverick123 · October 12, 2015, 04:23

@ rsdsaurav : What is the error exactly? Please paste the error text.

imen_ben · October 12, 2015, 05:34

I want to use"controlled current source" or "controlled voltage source" like i did to the battery example in order to impose a current as an input and a voltage as an output pf the PAC .This will convert the outputs + et - of the PAC

rsdsaurav · October 13, 2015, 04:01

Quote:

Originally Posted by maverick123

@ rsdsaurav : What is the error exactly? Please paste the error text.

Hi,
Actually I am unable to load the module, as the Fuel Cell module is not showing in Fluent..Can u clarify? Thanks in advance..

Bruno Machado · October 13, 2015, 04:42

Quote:

Originally Posted by rsdsaurav

Hi,
Actually I am unable to load the module, as the Fuel Cell module is not showing in Fluent..Can u clarify? Thanks in advance..

Have a look at this video. It show how to load fuel cell module.

https://www.youtube.com/watch?v=H3p7Vp99AwA

imen_ben · October 13, 2015, 07:31

the program is using matlab simulink

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PEM Fuel cell module meshes. ICEM vs workbench	aarvay	FLUENT	24	March 2, 2020 06:50
How to open Icem mesh in Ansys Fluent?	emmkell	FLUENT	27	February 6, 2018 03:34
problem in using parallel process in fluent 14	aydinkabir88	FLUENT	1	July 10, 2013 02:00
Fuel Cell modeling using Ansys Fluent	Diab	FLUENT	2	June 25, 2013 06:10
Fluent Fuel Cell Module Tutorial - Error!!!	shamsnoor	FLUENT	6	August 7, 2012 07:30

October 12, 2015, 04:23		#3
maverick123 Member Join Date: Nov 2014 Posts: 31 Rep Power: 11	@ rsdsaurav : What is the error exactly? Please paste the error text.

October 12, 2015, 05:34		#4
imen_ben New Member imen ben amira Join Date: Oct 2015 Posts: 3 Rep Power: 10	I want to use"controlled current source" or "controlled voltage source" like i did to the battery example in order to impose a current as an input and a voltage as an output pf the PAC .This will convert the outputs + et - of the PAC

October 13, 2015, 07:31		#7
imen_ben New Member imen ben amira Join Date: Oct 2015 Posts: 3 Rep Power: 10	the program is using matlab simulink