|
[Sponsors] |
January 2, 2016, 21:43 |
How can I get the max temperature?
|
#1 |
Member
wanghuo
Join Date: Aug 2014
Posts: 89
Rep Power: 11 |
Hello friends!
Now I was modeling a 3D geometry(a big geometry contain many small geometry ).If I want to get the max temperature of one small geometry ,which report type is the best choice?There are many max temperature such as suface integrals-Facet Maximum ;Surface integrals-vertex maximum ;volume integrals-maximum .I found that the value of them are different.Which is the true max temperature of the small geometry that I was interested in. When I display the temperature coutours of the geometry I found that the max temperature are different whether I choose the "node values ".Which is the max temperature(choose the node value or not choose?) Thank you in advance! |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Cavitation around NACA hydrofoil using interPhaseChangeFoam | Kozan | OpenFOAM Running, Solving & CFD | 28 | March 11, 2023 23:30 |
whats the cause of error? | immortality | OpenFOAM Running, Solving & CFD | 13 | March 24, 2021 07:15 |
Problem with zeroGradient wall BC for temperature - Total temperature loss | cboss | OpenFOAM | 12 | October 1, 2018 06:36 |
Problem of simulating of small droplet with radius of 2mm | liguifan | OpenFOAM Running, Solving & CFD | 5 | June 3, 2014 02:53 |
Is wall ajacent temperature equal to conservative temperature of the wall? | shenying0710 | CFX | 8 | January 4, 2013 04:03 |