CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT

very high swirl residual

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 15, 2016, 09:05
Default very high swirl residual
New Member
ujjawal aggarwal
Join Date: Jan 2016
Posts: 4
Rep Power: 7
aeroujj is on a distinguished road
I am doing an axisymmetric swirl model simulation with reynolds stress model. The model involves high speeds( around 80m/s). I have slightly high swirl residual values i.e. 4*10^-4. I have had similar values of continuity residual before I started using extremely low values of courant number (0.8 is currently in use) which has lowered it to 1.06*10^-8. I have attached a screenshot. Is it good enough convergence or I should do something to get better convergence?
Attached Images
File Type: jpg upload.jpg (71.1 KB, 4 views)
aeroujj is offline   Reply With Quote



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
settlingFoam unstable? bendel_boy OpenFOAM Running, Solving & CFD 38 July 8, 2016 05:07
Extrusion with OpenFoam problem No. Iterations 0 Lord Kelvin OpenFOAM Running, Solving & CFD 8 March 28, 2016 11:08
Wrong fluctuation of pressure in transient simulation caitao OpenFOAM Running, Solving & CFD 2 March 5, 2015 21:33
SLTS+rhoPisoFoam: what is rDeltaT??? nileshjrane OpenFOAM Running, Solving & CFD 4 February 25, 2013 04:13
Orifice Plate with a fully developed flow - Problems with convergence jonmec OpenFOAM Running, Solving & CFD 3 July 28, 2011 05:24

All times are GMT -4. The time now is 13:46.