how to delete the walls in fluent !!

belkhir72 · April 6, 2016, 19:49

hi all

i am new here & i need some help please !!
I am generating mesh for a collector solar with MCP,
i have problem of the walls was created automatically by GAMBIT between the solid a fluid & i want to delete them OR deactivated !!
thanks

Pedro Di Giovanni · April 6, 2016, 23:23

Wy you do not import Just the fluid body ?

belkhir72 · April 7, 2016, 10:32

Quote:

Originally Posted by Pedro Di Giovanni

Wy you do not import Just the fluid body ?

because this pic is particule from my geometry
& the solid body who is over this fluid is absorbing plate ( terms source )
i want to know how the temperature distribution between the two bodies.

Pedro Di Giovanni · April 7, 2016, 10:48

So you need to know the temperature between blue and yellow body?
I never worked with FLUENT, but i think the*DesignModeler*is the same.

On CFD in this case like that I work with different body, and on solver I will try to use boundary conditions to now the temperature o this interface

LuckyTran · April 7, 2016, 17:00

Just delete the surface from the mesh. If you're using v17 it's in the "setting up domain" ribbon. On older versions it's under "mesh" tab in the file menu.

April 6, 2016, 19:49	how to delete the walls in fluent !!	#1
belkhir72 New Member settou belkhir Join Date: Dec 2015 Posts: 5 Rep Power: 10	hi all i am new here & i need some help please !! I am generating mesh for a collector solar with MCP, i have problem of the walls was created automatically by GAMBIT between the solid a fluid & i want to delete them OR deactivated !! thanks Takue likes this.

April 7, 2016, 17:00		#5
LuckyTran Senior Member Lucky Join Date: Apr 2011 Location: Orlando, FL USA Posts: 5,672 Rep Power: 65	Just delete the surface from the mesh. If you're using v17 it's in the "setting up domain" ribbon. On older versions it's under "mesh" tab in the file menu. aero_head likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to conduction in fluent insulated walls ?	hegelim34	FLUENT	6	November 10, 2014 12:01
Unknown walls generated when import .msh file to fluent.	mdw0821	FLUENT	4	October 16, 2012 13:32
Master node in parallel computing only distirubtion	syadgar	FLUENT	1	September 8, 2009 16:41
On Bug of Fluent 12.0	lzgwhy	FLUENT	0	August 26, 2009 06:41
Delete cells in fluent	Christian	FLUENT	1	December 5, 2003 12:04

April 6, 2016, 23:23		#2
Pedro Di Giovanni New Member Pedro Henrique Di Giovanni Santos Join Date: Apr 2016 Location: Brasil Posts: 5 Rep Power: 10	Wy you do not import Just the fluid body ?

April 7, 2016, 10:48		#4
Pedro Di Giovanni New Member Pedro Henrique Di Giovanni Santos Join Date: Apr 2016 Location: Brasil Posts: 5 Rep Power: 10	So you need to know the temperature between blue and yellow body? I never worked with FLUENT, but i think theDesignModeleris the same. On CFD in this case like that I work with different body, and on solver I will try to use boundary conditions to now the temperature o this interface