CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

problem whit set a high region temperature for start combustion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 22, 2016, 08:26
Exclamation problem whit set a high region temperature for start combustion
  #1
New Member
 
Ahmad
Join Date: May 2016
Posts: 2
Rep Power: 0
ca3tiel is on a distinguished road
hi dear fluent user
guys, my model is 3d duck for simulation h2/air permixed combustion
i whant to set a high temprature region like 2000k in small region for start combustion
i do mark thats cycle area from adapt>region and then i patch thats area from solution initialaz but when i display static temperature and set a plane in thats area thats like an arc whit min 298 and max 2000k
guys plz suggest me how i can make a filled teperature region
u can see thats from this link
http://uploadboy.me/h0ws1d9f55su/1.jpg.html
ca3tiel is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
libOpenSMOKE Tobi OpenFOAM Programming & Development 512 February 6, 2017 02:40
Problem with chtMultiregionFoam radiation boundary condition baran_foam OpenFOAM Running, Solving & CFD 9 September 4, 2015 07:31
Combustion problem alok.cd FLUENT 2 April 23, 2013 08:41
combustion problem mcnair CFX 9 March 22, 2011 15:06
Problem on high density ratio in Level Set method Kai Yan Main CFD Forum 10 December 25, 2007 07:12


All times are GMT -4. The time now is 23:06.