Mesh deformation in ANSYS Fluent DDPM
Dear Friends,
I want to ask one fundamental question. My question is mesh deformation/ mesh dynamic is possible or not in ANSYS Fluent DDPM simulation [for multiphase flow: liquid/gas and solid particle]. I want to deform the mesh in ANSYS Fluent DDPM. Thankyou:) |
I have done both of them separately. Try it out and let us know if they work together.
Message me to discuss if necessary. Good luck. -BB |
Quote:
Thankyou |
Quote:
What I meant was I have done DDPM simulations and mesh deformation separately although, I have never done a simulation with both of them in it. For mesh deformation I use profiles and for DDPM I use UDFs. -BB |
You applied mesh deformation in case of multiphase or in one phase [E-E or E-L]. Also, for the same problem you have applied mesh deformation and DDPM separately or your, both problems were different?
Quote:
|
Quote:
24.1.2.3. Limitations on Using the Discrete Phase Model with Other ANSYS Fluent Models - Surface injections will be moved with the mesh when a sliding mesh or a moving or deforming mesh is being used, however only those surfaces associated with a boundary will be recalculated. Injections from cut plane surfaces will not be moved with the mesh and will be deleted when remeshing occurs. -BB |
Dear Friend, i am simply want to know, how did you deform the mesh for your case
Thanks Quote:
|
Quote:
-BB |
Can you give tutorial 2D box falling in water. My email id is roopesh99@gmail.com
Thank You. Quote:
|
All times are GMT -4. The time now is 18:16. |