|
[Sponsors] |
June 6, 2016, 11:20 |
match 2 faces with interface
|
#1 |
New Member
Sylvain
Join Date: Apr 2016
Location: Belfort, France
Posts: 6
Rep Power: 10 |
Hello everyone,
I want to move the little piece in the x direction so I need to create a real interface between the 2 pieces. The problem is that the 2 faces don't match. Fluent says that the interface correspond to the whole lower face when it's not (in blue). For the other part, it's all right since the whole upper piece face is include in the interface it is supposed to be. Could you help me to do this interface please? Thank you |
|
June 6, 2016, 13:49 |
|
#2 | |
Super Moderator
|
Quote:
|
||
June 7, 2016, 03:46 |
|
#3 |
New Member
Sylvain
Join Date: Apr 2016
Location: Belfort, France
Posts: 6
Rep Power: 10 |
it's a pity there is no other solutions but thank you very much
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Decomposing meshes | Tobi | OpenFOAM Pre-Processing | 22 | February 24, 2023 09:23 |
Foam::error::PrintStack | almir | OpenFOAM Running, Solving & CFD | 91 | December 21, 2022 04:50 |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops | avinashjagdale | OpenFOAM Meshing & Mesh Conversion | 53 | March 8, 2019 09:42 |
An error has occurred in cfx5solve: | volo87 | CFX | 5 | June 14, 2013 17:44 |