|
[Sponsors] |
June 15, 2016, 13:45 |
problem with raising temperature
|
#1 |
New Member
mokrane
Join Date: Aug 2009
Posts: 11
Rep Power: 16 |
Hello. I am simulating with fluent 2D- transient, axisymmetric swirl and UDF- the partially premixed combustion of biogas (40% ch4+60%co2) in a spark ignition engine for different values of equivalence ratio. My problem is that the temperature is always raising for all cases, which is not normal! Please help me
The chemical reaction is: CH4+1.5CO2+3/ϕ (O2+3.76N2 )→2.5CO2+2H2 O+(3/ϕ-2)O2+11.28/ϕ N2 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[openSmoke] libOpenSMOKE | Tobi | OpenFOAM Community Contributions | 562 | January 25, 2023 09:21 |
Problem with Turbulent Heat Flux Temperature boundary condition | Manuel CFD | OpenFOAM Running, Solving & CFD | 11 | March 17, 2016 15:12 |
Ansys CFX problem: unexpected very high temperatures in premix laminar combustion | faizan_habib7 | CFX | 4 | February 1, 2016 17:00 |
Bulk Temperature Problem | 4asino | Main CFD Forum | 0 | June 12, 2015 08:39 |
problem build wall boundary temperature profile | kyran | OpenFOAM Pre-Processing | 0 | May 21, 2015 05:46 |