 |
 |
 |
|
|
|
[Sponsors] | ||||
Manually control Courant number in a transient simulation |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 25, 2016, 06:44
|
Manually control Courant number in a transient simulation
|
#1 |
|
New Member
Karthik
Join Date: Jul 2016
Posts: 2
Rep Power: 0  |
I am trying to solve a 2-D cavity problem which is inherently transient.
Is it possible to specify to Fluent while solving the courant number for ranges of iterations as following for example: iteration_range--------------courant number 1. 1 to 1000-----------------0.5 2. 1000 to 5000---------------5 3. 5000 to 10000-------------- 50 and so on Any help regarding courant number control would be helpful. Thanks |
|
|
|
|
|
| Tags |
| cfl, convergence, courant number, fluent, transient 2d |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [mesh manipulation] Mesh Refinement | Luiz Eduardo Bittencourt Sampaio (Sampaio) | OpenFOAM Meshing & Mesh Conversion | 42 | January 8, 2017 12:55 |
| [OpenFOAM.org] OF2.3.1 + OS13.2 - Trying to use the dummy Pstream library | aylalisa | OpenFOAM Installation | 23 | June 15, 2015 14:49 |
| SigFpe when running ANY application in parallel | Pj. | OpenFOAM Running, Solving & CFD | 3 | April 23, 2015 14:53 |
| Erroneous Courant Number in FOAM log? | cwang5 | OpenFOAM Running, Solving & CFD | 0 | April 29, 2014 22:45 |
| [blockMesh] --> foam fatal error: | lillo763 | OpenFOAM Meshing & Mesh Conversion | 0 | March 5, 2014 10:27 |
Linear Mode
