CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

DPM BC "Reflect" for Pressure Outlet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 31, 2016, 23:11
Default DPM BC "Reflect" for Pressure Outlet
  #1
New Member
 
Salman Sakib
Join Date: Aug 2016
Posts: 8
Rep Power: 3
salmanayon is on a distinguished road
Hi I am simulating a wave tank where one side is a velocity inlet and other side is a pressure outlet. But after the DPM injection I set both the BC for the inlet and outlet as "Reflect" in the DPM tab in the BC conditions of each. I wanted to keep the limited particles inside the system though the water flow is like a channel. I'm not sure if it's working.

Does DPM particles leave the system through outlets even though the BC of the outlets are set as "Reflect/Trap"?

Thanks a lot in advance
salmanayon is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure Outlet Guage pressure Mohsin FLUENT 36 April 29, 2016 17:16
Pressure Outlet - Effect of domain bineet_aero STAR-CCM+ 3 April 5, 2016 04:51
Boundary conditions outlet SarahLee OpenFOAM Running, Solving & CFD 1 November 28, 2015 10:34
Supersonic outlet working saisanthoshm88 CFX 1 November 15, 2015 19:43
Too low temperature at combustor outlet romekr FLUENT 2 February 6, 2012 11:02


All times are GMT -4. The time now is 23:45.