CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

solver setting, boundary conditions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 1, 2016, 07:13
Default solver setting, boundary conditions
  #1
New Member
 
Aseel
Join Date: Oct 2016
Posts: 23
Rep Power: 2
Ad.Al.Qads is on a distinguished road
Hello everyone

i am currently using ice for cold flow simulation. however, i have faced some problem duringthe solver set up and set up process as follows


1- i have encounter a problem during solver setting. i have notice that the boundary conditions is not automatically generated and when i want to create new boundary conditions there is not zones showed in the zone window (refer to the picture 1).pic1.jpg

2- during the set up process, the dynamic mesh is not automatically set up and i need to set it manually. however , the zones are not generated completely as in the tutorial (refer to picture 2).pic2.PNG

i don't know how to proceed with these issues exist.

can anyone help,please?
thank you
Ad.Al.Qads is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error - Solar absorber - Solar Thermal Radiation MichaelK CFX 12 September 1, 2016 05:15
Wind turbine simulation Saturn CFX 45 February 8, 2016 05:42
Centrifugal fan j0hnny CFX 12 January 7, 2016 03:44
Difficulty In Setting Boundary Conditions Moinul Haque CFX 4 November 25, 2014 18:30
determining displacement for added points CFDnewbie147 OpenFOAM Native Meshers: snappyHexMesh and Others 1 October 22, 2013 09:53


All times are GMT -4. The time now is 18:53.