CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Radiation Model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 13, 2017, 02:45
Default Radiation Model
  #1
New Member
 
engeagle
Join Date: Mar 2016
Posts: 18
Rep Power: 3
engeagle is on a distinguished road
Hello,

I will use radiation model (DO) in my simulation. But I didn't use it before, so I have some problems. In my simulation, one wall temperature is 1273 K. Temperature is 293 K for other walls. This is a furnace. Air flows inside the furnace. But I don't know absorption coefficient, scattering coefficient, refractive index, emissivity values. How can I decide these values? Are these values important for only air? Also, can these values important for wall material? I couldn't be sure of it, because there is no wall thickness in the model. In addition, How can I obtain better convergence?

Thank you.
engeagle is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Overflow Error in Multiphase Modelling with Two Continuous Fluids ashtonJ CFX 6 August 11, 2014 14:32
How model radiation of both solid wall and fluid£¿ Harry Qiu FLUENT 2 February 4, 2013 00:04
problem in glass radiation model (DO model) wunan805 FLUENT 0 October 10, 2012 05:06
Help: Radiation model MANOJKUMAR FLUENT 4 November 24, 2005 03:45
definition difficulty-->DO radiation model Harry Qiu FLUENT 0 March 29, 2001 09:19


All times are GMT -4. The time now is 22:51.