|
[Sponsors] |
Boundary Condition for 2D simulation of Turbo-machinery |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 16, 2017, 06:33 |
Boundary Condition for 2D simulation of Turbo-machinery
|
#1 |
New Member
Vishal
Join Date: Jan 2017
Posts: 1
Rep Power: 0 |
Dear users,
This is first time i am doing a 2D analysis, since 3D un-steady analysis will involve huge computational time. I am planning to do a 2D un-steady analysis to simulate the effect of on-coming wakes on LPT Vane boundary layer and blade loading by using Fluent. For simulating wakes I am using cylinder upstream of LPT Vane(picture enclosed).I have the following queries 1. What should be the boundary condition for LPT Vane Edges which I have marked with red line, if I am doing a 2D analysis how does I specify periodicity (rotational) or does it is required.Edges with black line are for inlet and outlet. 2. Same is for the hole mesh. 3. Does I have to do a axi-symmetric analysis or 2D planar. I have attached two mesh pics one that of hole and other one for LPT Vane. Thanks in advance for your valuable input. |
|
January 17, 2017, 18:07 |
|
#2 |
Senior Member
Lucky
Join Date: Apr 2011
Location: Orlando, FL USA
Posts: 5,672
Rep Power: 65 |
If I understand correctly, I guess you will do a sliding mesh and have a moving wake pass through?
You would not be able to do this in an axissymmetric simulation. This looks to be 2D-planar. I wonder if there is some cute transform or option to make it 2D-curvillear but I do not know off the top of my head.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiation in semi-transparent media with surface-to-surface model? | mpeppels | CFX | 11 | August 22, 2019 07:30 |
Problem in setting Boundary Condition | Madhatter92 | CFX | 12 | January 12, 2016 04:39 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
several fields modified by single boundary condition | schröder | OpenFOAM Programming & Development | 3 | April 21, 2015 05:09 |
Difficulty In Setting Boundary Conditions | Moinul Haque | CFX | 4 | November 25, 2014 17:30 |