CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Divergence detected in AMG solver

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 26, 2017, 01:29
Question Divergence detected in AMG solver
New Member
Sk Tanbir Islam
Join Date: Aug 2015
Posts: 1
Rep Power: 0
Tanbir is on a distinguished road

I am facing divergence problem during a mould filling simulation using multi-phase Eularian model. When I am trying to access the pressure [C_P(c,t)] of the secondary phase, it shows the divergence. I have used a udf (DEFINE_PROPERTY) for viscosity change with pressure value of the secondary phase. The same udf is working with a simpler geometry but not with my actual geometry. The mesh quality of the geometry is
Minimum Orthogonal Quality = 7.56955e-01
Maximum Aspect Ratio = 1.69498e+01 (about 10% of the total elements)

If I take the pressure value as a constant then it works fine with the current geometry.

Please give me your suggestions.
Thanks a lot.
Tanbir is offline   Reply With Quote


divergence amg solver, floating point, mesh quality, multiphase flow

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Divergence detected in AMG solver: pressure correction xinquanzhoucn FLUENT 5 July 21, 2014 04:49
Divergence detected in AMG solver: temperature otubaba FLUENT 7 October 29, 2013 09:39
Floating point error and divergence detected aannjj FLUENT 0 July 2, 2013 03:44
3d vof Smaras FLUENT 2 February 19, 2013 07:58
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 11:34

All times are GMT -4. The time now is 23:22.