CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Problems while running Cold Flow simulation 3D/ requesting 2D gmtry and tutorial ICE (https://www.cfd-online.com/Forums/fluent/184249-problems-while-running-cold-flow-simulation-3d-requesting-2d-gmtry-tutorial-ice.html)

Excalibu2r February 26, 2017 11:58

Problems while running Cold Flow simulation 3D/ requesting 2D gmtry and tutorial ICE
 
I have tried running serial-double precision and serial-single precision and also in double precision mode.

After running through about 300 iterations I ran to this problem in fluent
"The fl file could not be started"

If anyone happen to have the files for 2D geometry & tutorial file for IC engine simulation please email me at jyotishrajt@gmail.com

I have attached the file which displays my system info and the fluent screenshot. Please help.http://dl.dropbox.com/s/8qhr8drs6jkv...71%29.png?dl=0
http://dl.dropbox.com/s/kom4rjak0hth...69%29.png?dl=0


All times are GMT -4. The time now is 08:44.