CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Repeating Error Message

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 7, 2017, 16:42
Default Repeating Error Message
  #1
New Member
 
Luke Brawley
Join Date: Mar 2017
Posts: 2
Rep Power: 0
brawleyl is on a distinguished road
I am attempting to set up a simple 2D geometry to model an oscillating flat plate with the goal being to look at the boundary layer fluctuation. I have created a UDF to control the oscillating velocity as a function of time. After setting up the geometry, mesh, and solution method I run the problem then go to open the results. Every time I try to open the results I get the error message "ERROR: 'wbload' action requires parameter: 'id'."

I have been trying all day to resolve this error and I am no closer to figuring it out. The only reference I could find on this forum was from 5 years ago and said that it happened if there were special characters in the name of your project which is not true in my case. A friend of mine is running a similar problem and gets no error messages. Even when I switch every one of my conditions to be the same as his I still get the same error message. Does anyone have any idea what could cause this error?
brawleyl is offline   Reply With Quote

Old   March 7, 2017, 17:00
Default
  #2
New Member
 
Luke Brawley
Join Date: Mar 2017
Posts: 2
Rep Power: 0
brawleyl is on a distinguished road
This error has been resolved. A folder that was farther back in the directory path had a pound sign in it but none in the active folder which is why I didn't find it immediately.
brawleyl is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Substitution of repeating geometry to simplify akay ANSYS 0 December 9, 2014 15:34
Cyclic BC for repeating geometries Yeru OpenFOAM Programming & Development 4 July 3, 2014 09:50
Sliding Mesh/ Repeating interface apc3161 STAR-CCM+ 0 September 4, 2009 19:31
Repeating same time steps (FSI) CJ Tune CD-adapco 0 February 25, 2003 21:27
Repeating same time steps (FSI). cjtune CD-adapco 0 February 20, 2003 00:05


All times are GMT -4. The time now is 08:32.