 |
 |
 |
|
|
|
[Sponsors] | ||||
April 16, 2017, 06:52
|
foating point exception
|
#1 |
|
New Member
hadi
Join Date: Apr 2017
Posts: 1
Rep Power: 0  |
I am working on an ejector system with fluent. this system has two inlets and one pressure outlet and the flow inside the ejector is supersonic. while i apply pressure inlet boundary conditions, fluent gives error as follows:
Divergence detected in AMG solver: ads-0 Primitive Error at Node 1: floating point exception what can i do? it is interesting to note that while i apply mass flow boundary conditions for inlets, there is no problem. |
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| icoFoam floating point exception (8) | leizhao512 | OpenFOAM Running, Solving & CFD | 7 | November 1, 2018 12:43 |
| simpleFoam: floating point exception | student666 | OpenFOAM Running, Solving & CFD | 9 | March 13, 2016 19:23 |
| Floating point exception (core dumped) for GAMG solver | yuhou1989 | OpenFOAM Running, Solving & CFD | 2 | March 24, 2015 20:28 |
| Finished simulation doesn't start: floating point exception [Divide by zero] | MaxCFD | STAR-CCM+ | 3 | June 26, 2011 11:31 |
| Cannot Open .sim (Floating Point Exception) | trex930 | STAR-CCM+ | 1 | July 30, 2010 07:51 |
Linear Mode
