CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

mist jet impingement cooling on a flat plate surface.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 21, 2017, 00:21
Default mist jet impingement cooling on a flat plate surface.
  #1
New Member
 
MONU KUMAR
Join Date: Nov 2016
Posts: 2
Rep Power: 0
monu.kumar is on a distinguished road
Respected Sir/Madam,

I'm facing a problem in execution of a research paper of Ramadhyani and Graham(1996), in 2D Domain model.Grid Independence test have been done. Boundary conditions are Heat flux upto 200000 W/m2 to 600000 W/m2, and getting corresponding temperature value on the surface of plate in Eularien and VOF model in fluent.

But I'm getting temperature very high above 600k. Please if someone can give me suggestion regarding temperature increase.

Resultant temperature value must be within 350k to 400k.

Last edited by monu.kumar; April 21, 2017 at 05:09.
monu.kumar is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Drag Coefficient on flat plate normal to flow Bin STAR-CCM+ 16 April 25, 2017 11:44
Spray-Jet impingement on vertical flat surface Triccio CFX 6 June 1, 2015 09:49
Flat plate analysis in cfx hamed.majeed CFX 14 February 4, 2015 08:07
Calculate Drag force for flat plate vsun FLUENT 0 October 3, 2010 07:56
air jet impingment on a moving flat plate blueman_esf62 FLUENT 0 May 2, 2009 02:40


All times are GMT -4. The time now is 16:42.