VF Phase does not converge

nashim.chowdhury · April 21, 2017, 21:15

Hi, I am modelling cavitation in a t-junction pipe. All of my residuals converge apart from the vf phase which plateaus.

Why does it not converge?

EDIT: could it be due to that fact I am running this as steady ?

sina_mech · April 24, 2017, 02:44

Something that you should find out, before looking in other details, is that whether your problem has steady state solution or not. For example, filling a tank has no steady state solution, and water flow in a tank with an outlet might have a SS solution. I don't know your problem's details, but I don't think it has a SS solution.

Then, I would make sure I have correct boundary conditions, and initial condition (correct patching of the domain if needed for the second phase). Try to reduce the volume fraction under-relaxation factor to something around 0.25, and see if you notice a change or not.

nashim.chowdhury · April 24, 2017, 04:29

Hi, yes it does converge when ran transiently, agreed, this system is not in a steady state.
Thank you for the response

April 21, 2017, 21:15	VF Phase does not converge	#1
nashim.chowdhury New Member nashim Join Date: Feb 2017 Posts: 9 Rep Power: 9	Hi, I am modelling cavitation in a t-junction pipe. All of my residuals converge apart from the vf phase which plateaus. Why does it not converge? EDIT: could it be due to that fact I am running this as steady ?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FVUS (Finite Volume Utilities and Solvers) / Wildkatze (solver) Updates	arjun	Main CFD Forum	30	July 22, 2017 03:27
Sharing links for two phase solver packages developed by openfoam community	swap_9068	OpenFOAM Programming & Development	1	April 2, 2017 05:43
Gravity/Buoyancy/Buoyancy reference density in two phase flow	sharifi	CFX	10	June 9, 2014 10:23
Specifying phase on both sides of a Boundary Condition?	rassilon	OpenFOAM Running, Solving & CFD	3	November 11, 2009 00:41
Converge problem for multiphase flow	Jen	FLUENT	4	July 20, 2005 16:52

April 24, 2017, 02:44		#2
sina_mech Senior Member SinaJ Join Date: Nov 2009 Posts: 136 Rep Power: 16	Something that you should find out, before looking in other details, is that whether your problem has steady state solution or not. For example, filling a tank has no steady state solution, and water flow in a tank with an outlet might have a SS solution. I don't know your problem's details, but I don't think it has a SS solution. Then, I would make sure I have correct boundary conditions, and initial condition (correct patching of the domain if needed for the second phase). Try to reduce the volume fraction under-relaxation factor to something around 0.25, and see if you notice a change or not.

April 24, 2017, 04:29		#3
nashim.chowdhury New Member nashim Join Date: Feb 2017 Posts: 9 Rep Power: 9	Hi, yes it does converge when ran transiently, agreed, this system is not in a steady state. Thank you for the response