|
[Sponsors] |
DPM, Rosin-Rammler Destribution, Min. and Max. Diameters |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 25, 2017, 16:00 |
DPM, Rosin-Rammler Destribution, Min. and Max. Diameters
|
#1 |
Member
Serguei
Join Date: Mar 2015
Posts: 33
Rep Power: 11 |
Hello all,
in the Rosin-Rammler Distribution there are two parameters (among others): min. and max. diameters. They define them as "smallest and largest diameters to be considered in size distribution". My calculations show, that the results are very sensitive to max. diameter. But it is very unclear. Because in the real distribution we always have some small amount very small and very large droplets. I don't see the criteria, where I should do the cut off. Could any body tell me, how I may define the "smallest" and "largest" droplets size? |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ and u+ values with low-Re RANS turbulence models: utility + testcase | florian_krause | OpenFOAM | 114 | August 23, 2023 05:37 |
Near wall treatment in k-omega SST | Arnoldinho | OpenFOAM Running, Solving & CFD | 38 | March 8, 2017 13:48 |
multiphaseEulerFoam (OF2.3.0) : Courant number explodes when running in parallel | Mehrez | OpenFOAM Running, Solving & CFD | 10 | May 18, 2016 11:44 |
Problem of simulating of small droplet with radius of 2mm | liguifan | OpenFOAM Running, Solving & CFD | 5 | June 3, 2014 02:53 |
On the damBreak4phaseFine cases | paean | OpenFOAM Running, Solving & CFD | 0 | November 14, 2008 21:14 |