CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Set a BC based on a calculated value within a domain

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 14, 2017, 17:44
Default Set a BC based on a calculated value within a domain
  #1
Senior Member
 
Astio Lamar
Join Date: May 2012
Location: Pipe
Posts: 177
Rep Power: 7
asal is on a distinguished road
Hello all.

I want to simulate a case that volume flow through one outlet should be governed by pressure outlet.
This need try and error to find the correct pressure to be set through the outlet which results in the desired volume flow.
I am wondering if there is any possibility to automatize this process. For example, read the volume flow through the outlet after a couple of iterations, do the math and set a new pressure to the BC until gaining the flow that is desired?
Thanks.
asal is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to set up initial solitary wave in the domain Ted Chu FLUENT 2 September 27, 2016 02:45
set BC mass-flow-inlet via UDF and via GUI perform different result sawa25 FLUENT 1 February 25, 2015 01:51
How to set different physics timescales in two separted fluid domain? qujianyu CFX 4 December 1, 2013 05:32
Error finding variable "THERMX" sunilpatil CFX 8 April 26, 2013 07:00
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43


All times are GMT -4. The time now is 06:05.