CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Flux boundary condition for UDS

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 23, 2017, 01:38
Default Flux boundary condition for UDS
  #1
New Member
 
Nadun Palmada
Join Date: Apr 2017
Posts: 4
Rep Power: 2
Nadun19 is on a distinguished road
Hey guys

I was wondering what sign convention fluent uses when specifying flux boundary conditions for a user defined scalar at a wall? i.e. if something is leaving the domain should the flux have a positive or negative value?

Thanks
Nadun19 is offline   Reply With Quote

Reply

Tags
fluent, flux boundary condition, user defined scalar

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Out File does not show Imbalance in % Mmaragann CFX 5 January 20, 2017 11:20
My radial inflow turbine Abo Anas CFX 26 December 13, 2016 11:17
Low torque values on Screw Turbine Shaun Waters CFX 34 July 23, 2015 08:16
Low Mixing time Problem Mavier CFX 5 April 29, 2013 00:00
Implement constant heat flux boundary condition new_at_this Main CFD Forum 2 April 6, 2012 23:35


All times are GMT -4. The time now is 13:05.