CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

partial premixed combustion model early combustion than expected

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 27, 2017, 14:38
Post partial premixed combustion model early combustion than expected
  #1
New Member
 
omar adel
Join Date: Oct 2015
Posts: 2
Rep Power: 0
omaradel is on a distinguished road
hello everyone,
i am trying to model combustion process for an gasoline Internal combustion engine ( port injection type )
i am using partially premixed model + injecting fuel (c7h16) using DPM model.
the start of injection angle @ 312 CA and the spark timing @ 705 CA , but the model starting combustion from itself at angle about 338 CA ( end of injection 340 )
i use defaults of partially premixed model except changing
1- the op pressure
2-the premixed model ( use G eq. model )
3-the initialization change progress variable to 0
so any help in that problem will be very helpful
thanks in advance
omaradel is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesquite - Adaptive mesh refinement / coarsening? philippose OpenFOAM Running, Solving & CFD 94 January 27, 2016 10:40
Compiling dynamicTopoFvMesh for OpenFOAM 2.1.x Saxwax OpenFOAM Installation 25 November 29, 2013 06:34
partial premixed combustion for different gas mixture amitbdt143 FLUENT 0 February 1, 2013 05:14
Partially Premixed Combustion - Direct Fired Boiler oknus FLUENT 0 April 10, 2012 10:52
eddy dissipation model: combustion doesn't occur roukaia FLUENT 0 December 25, 2011 14:50


All times are GMT -4. The time now is 05:24.