CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Periodic boundary condition with unstructured mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 1, 2017, 23:15
Default Periodic boundary condition with unstructured mesh
  #1
New Member
 
Mahmoud
Join Date: Mar 2015
Posts: 12
Rep Power: 4
Eng.Mahmoud abd elsalam is on a distinguished road
hi , every one
iam working on the compressor cascade and i want to make a validation with paper but, i faced a big problem to make periodic BC in fluent , errors usually appeared.
i tried to overcome this periodic problem with setting zone with symmetry BC
but, the results of contours not matched with validation paper
this is 2d mesh of my project

any periodic BC replaced by symmetry BC
and this is what i should do

any one can help me
thanks advanced
Eng.Mahmoud abd elsalam is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
My radial inflow turbine Abo Anas CFX 26 December 13, 2016 11:17
Basic Nozzle-Expander Design karmavatar CFX 20 March 20, 2016 09:44
Problem in setting Boundary Condition Madhatter92 CFX 12 January 12, 2016 05:39
sliding mesh problem in CFX Saima CFX 45 September 22, 2015 10:53
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 00:12.