|
[Sponsors] |
Rotating frame of reference convergence issues |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 31, 2017, 02:30 |
Rotating frame of reference convergence issues
|
#1 |
New Member
Shrirang
Join Date: May 2016
Location: India
Posts: 18
Rep Power: 9 |
Hello,
I have modeled a disc brake having two air zones surrounding it. The first zone is named "rotating fluid" as it will have rotating frame while the next enclosure has "fluid2" which will be stationary. In cell zone conditions, I have given energy source for the solid. All the zones are defined as rotating, but solid and fluid2 are given zero velocity (absolute). In results velocity field seems to be good with results from other packages. Issues: 1. It seems fluent is creating many walls, when I click on display them, it shows failed to create sliding interface. 2. The temperature in solid is reaching way beyond practical values. 3. The convergence graph is a straight line without any intent of getting low. 4. Have confusion about the coupled wall and the Matching options in "Mesh interfaces" Thanks in advance. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rotating Reference Frame Pressure Gradient | clac | FLUENT | 0 | August 22, 2012 18:20 |
Different solutions for Rotating Reference Frame | fafou09 | FLUENT | 1 | July 24, 2012 10:06 |
Boundary conditions for rotating reference frame | Borna | OpenFOAM | 1 | August 24, 2011 10:25 |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |
Rotating Reference Frame | Ketan | FLUENT | 0 | May 17, 2007 13:13 |