Ship resistance shows wiggles when using Overset mesh and dynamic mesh in Fluent

Qingsong · August 7, 2017, 11:08

Hi,
I did a simulation of ship resistance with overset mesh and dynamic mesh in Ansys Fluent. The mesh around the ship and that in the background were built separately.

First, I turned off the dynamic mesh and using overset meshing only. I got a smooth force curve.

However, when turned on the dynamic mesh, calculations began to show wiggles (see the picture) for the force on ship surface.
At the same time, nonphysical phenomenon was observed for shear stress on the surface (see the second picture).

Does anyone have a clue for the problem? I really appreciate if you can tell me. Thanks.

Qingsong

nTTs · February 4, 2020, 14:48

Hello,

Have you found an explanation for this phenomenon?

phamminhngoc · March 21, 2022, 15:08

I have get same problem, did you solve it?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Interesting problem: Parallel Processor VOF Fluent + Dynamic Mesh + System Coupling	spaceprop	FLUENT	5	September 2, 2014 09:43
[Star-CCM+ v9] Dynamic Overset Mesh basic problem	johncoffey	STAR-CCM+	5	June 17, 2014 14:14
Dynamic mesh in Fluent to study tire in contact with road surface	lihuang	FLUENT	10	March 8, 2011 10:21
Dynamic Mesh Can not Be Used in FLUENT 12.0	lzgwhy	ANSYS	1	April 18, 2010 18:19
Moving Dynamic Mesh in Fluent 6.2	R.M.Bharath Somayaji	FLUENT	0	January 9, 2006 20:36

February 4, 2020, 14:48		#2
nTTs New Member Tough Luck Join Date: Oct 2016 Posts: 14 Rep Power: 9	Hello, Have you found an explanation for this phenomenon?

March 21, 2022, 15:08		#3
phamminhngoc New Member Ngoc Join Date: Jan 2016 Posts: 2 Rep Power: 0	I have get same problem, did you solve it?