CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

Combustion an Boiling at the same time

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 16, 2017, 14:10
Default Combustion an Boiling at the same time
  #1
New Member
 
Vincenzo
Join Date: Sep 2017
Posts: 7
Rep Power: 8
Vincenzo_ is on a distinguished road
Im tring to model a combustion of methane and air to create the heat source to boil water all in the same chamber, this is, water enters a chamber and encounters a flame caused by the combustion fo air and methane.

I know how to simulate combustion and I know how to simulate boiling using the eulerian boiling model but apart one from the other. Can't find a way to combine both of them in a single simulation.

I'm selecting Eulerian boiling model,I choose 3 phases: water, steam and methane-air (which is set in species transport), when I go to Phases interactions on the mass transfer mechanism I cant find the boiling model nor the evaporation-condensation, so how I'm supposed to set the saturation temperature? It seemss that this is not the way to proceed so...

Does anyone knows what models should I use to simulate the combustion of methane and air + the boiling of water in the same chamber? Where do I put the saturation temperature?

If it's not possible then I was thinking in taking the heat data generated from the combustion model and use it as an entry for the boiling at which I ask, is this possible? what data should I need to export?

Thanks!
Vincenzo_ is offline   Reply With Quote

Reply

Tags
boiling, combstion, fluent

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
AMI speed performance danny123 OpenFOAM 21 October 24, 2020 05:13
pressure in incompressible solvers e.g. simpleFoam chrizzl OpenFOAM Running, Solving & CFD 13 March 28, 2017 06:49
High Courant Number @ icoFoam Artex85 OpenFOAM Running, Solving & CFD 11 February 16, 2017 14:40
Moving mesh Niklas Wikstrom (Wikstrom) OpenFOAM Running, Solving & CFD 122 June 15, 2014 07:20
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 16:33


All times are GMT -4. The time now is 14:07.