CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   how to plot temperature vs time in transient simulation (https://www.cfd-online.com/Forums/fluent/196806-how-plot-temperature-vs-time-transient-simulation.html)

waqarha2003 December 17, 2017 08:41
how to plot temperature vs time in transient simulation
 
1 Attachment(s)
hi. for a flow of air strikes on a heated plate i want to plot in x axis time and y axis temperature how to do it. please help other things i have done it just this part is remaining in my work which i am facing.

the case is of jet impingement.
air with velocity of 6m/s strikes a heated plat at temperature of 900K and the temperature start dropping and reached to 500K.

now the problem is how much time it take to reach from 900K to 500K. how i calculate this in ANSYS fluent.

any one know please help me .

lcarasik December 17, 2017 15:19
Quote:
Originally Posted by waqarha2003 (Post 675368)
hi. for a flow of air strikes on a heated plate i want to plot in x axis time and y axis temperature how to do it. please help other things i have done it just this part is remaining in my work which i am facing.

the case is of jet impingement.
air with velocity of 6m/s strikes a heated plat at temperature of 900K and the temperature start dropping and reached to 500K.

now the problem is how much time it take to reach from 900K to 500K. how i calculate this in ANSYS fluent.

any one know please help me .
Please stop posting this same question in different threads.

waqarha2003 December 19, 2017 11:31
i have just posted it once and in first thread no one has replied , i think that no one understand it because of that in 2nd thread i explain it in detail

flotus1 December 19, 2017 11:57
If no one answers your thread, you can still edit the original post and then bump the thread with a new answer. After you read this, particularly items 1, 2 and 4
https://www.cfd-online.com/Forums/si...tml#post612025

s1291 December 30, 2017 07:57
What CFD software are you using? is it Ansys Fluent?

waqarha2003 December 31, 2017 08:31
ANSYS Fluent 18.1

jbo214 December 31, 2017 13:18
You can use surface monitors to plot nearly any value in Fluent.

https://www.sharcnet.ca/Software/Flu...g/node1050.htm

s1291 December 31, 2017 17:01
Open CFD-Post
  • Create a new point in the location where you want: from the menu choose: Insert > Location > Point. give it a name and press OK.
    At the bottom enter its coordinates.
  • Now create a chart: from the menu choose Insert > Chart. give it a name and press OK.
    At the left bottom clickGeneral tab, specify the type as: XY - Transient or Sequence.
  • Click on Data Series tab and under Data Source Location choose the point you created in first step.
  • Click on X axis tab, under expression select time.
  • Click on Y axis tab, under variable box select your variable for example Temperature.
  • Click Apply.

waqarha2003 January 8, 2018 14:10
thanks dear

raghuramswaroop July 14, 2018 15:48
Hi jbo214. Do you know how to get surface monitors panel in ANSYS 18.2 ? I am a newbie to ANSYS and facing problem in finding it.

Thanks in advance.

ironman_tony May 2, 2021 17:12
Worked for me
 
Quote:
Originally Posted by s1291 (Post 676548)
Open CFD-Post
  • Create a new point in the location where you want: from the menu choose: Insert > Location > Point. give it a name and press OK.
    At the bottom enter its coordinates.
  • Now create a chart: from the menu choose Insert > Chart. give it a name and press OK.
    At the left bottom clickGeneral tab, specify the type as: XY - Transient or Sequence.
  • Click on Data Series tab and under Data Source Location choose the point you created in first step.
  • Click on X axis tab, under expression select time.
  • Click on Y axis tab, under variable box select your variable for example Temperature.
  • Click Apply.
This worked for me! Thank you

Rajkool August 4, 2021 07:17
Line as location
 
Quote:
Originally Posted by s1291 (Post 676548)
Open CFD-Post
  • Create a new point in the location where you want: from the menu choose: Insert > Location > Point. give it a name and press OK.
    At the bottom enter its coordinates.
  • Now create a chart: from the menu choose Insert > Chart. give it a name and press OK.
    At the left bottom clickGeneral tab, specify the type as: XY - Transient or Sequence.
  • Click on Data Series tab and under Data Source Location choose the point you created in first step.
  • Click on X axis tab, under expression select time.
  • Click on Y axis tab, under variable box select your variable for example Temperature.
  • Click Apply.
Hello s1291,

I don't know I will get a reply after 4 years for the same question but I want to know how to choose line as the location for XY Transient or Sequence. Could you suggest to me how to do it?

Thank you
Raj


All times are GMT -4. The time now is 12:59.