CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

solving catalytic surface reaction error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 13, 2018, 12:07
Default solving catalytic surface reaction error
  #1
Senior Member
 
Weiqiang Liu
Join Date: Feb 2018
Posts: 277
Rep Power: 6
Weiqiang Liu is on a distinguished road
Hi all,

I've doing a methane combustion simulation with fluent. The geometry includes two big planes with catalyst coated on the wall. Therefore it is simplified into a two dimensional problem. The gas phase mechanism, surface mechanism, thermodynamic data of gas and surface species and transport data are downloaded from chemkin official website.

All chemkin format files can be imported into fluent without any error. I have also verified that there is no mistakes about fluent setup.

I can get good result with just gas phase reactions. however, once I add surface reactions into the case. Fluent will pop up 'received fatal signal (segmentation error)' at the beginning of calculation.

this has confused me for weeks. Can anybody help me with it? Thanks a lot
Weiqiang Liu is offline   Reply With Quote

Reply

Tags
chemkin, gas phase mechanism, received fatal signal, surface mechanism

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Segmentation fault when using reactingFOAM for Fluids Tommy Floessner OpenFOAM Running, Solving & CFD 4 April 22, 2018 13:30
SLTS+rhoPisoFoam: what is rDeltaT??? nileshjrane OpenFOAM Running, Solving & CFD 4 February 25, 2013 05:13
pisoFoam with k-epsilon turb blows up - Some questions Heroic OpenFOAM Running, Solving & CFD 26 December 17, 2012 04:34
Ansys Fluent 13.0 UDF compilation problem in Window XP (32 bit) Yogini Fluent UDF and Scheme Programming 7 October 3, 2012 08:24
DecomposePar links against liblamso0 with OpenMPI jens_klostermann OpenFOAM Bugs 11 June 28, 2007 18:51


All times are GMT -4. The time now is 11:33.